CNCRT60: CNC Router Tips Podcast On Facebook Live

Released Friday, 16th November 2018
Good episode? Give it some love!
Reviews
Creators
Lists
CNCRT60: CNC Router Tips Podcast On Face Book Live
CNC Router Tips Podcast Episode 60

For the 60th episode of the CNC RouterTips Podcast we broadcast on Facebook Live. This is the first video episode of the podcast and we hope to add more video episodes in the future.

Broadcasting the CNC Router Tips Podcast on Facebook Live should reach a broader audience of CNC enthusiast who might not already be podcast listeners.

Bill Griggs discusses what he has been up to in CNC over the summer and what he has planned for the winter. Bill talked about his trips to the Podcast Movement Conference, MasterCam Education Summit and a field trip to Stepcraft US.

Then BIll discussed a bit of new equipment he got for creating podcast and video content. For video we look at the new SMOVE Mobile extendable smartphone stabilizer. This camera gimbal shoul make better quality shop videos without jitters.

Bill also discusses how he used OBS studio to create his Facebook Live Video. OBS Studio is an open Source broadcasting platform that is rapidly gaining popularity.

On the audio side of things, Bill Griggs talked about 3 amazing microphone you can use for all your podcasting and video recording without breaking the back. In fact all 3 of the mics discussed can be bought for around $110 total. For more information and an in depth examination of these mic check out Podcast By Friday Episode 39 with Bill Griggs and Kingsley Grant. http://www.podcastbyfriday.com/39.

Lastly in this episode we talk about BIll's new products and his soon to be released ebook.

Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/60
Facebook LIve https://www.facebook.com/cncroutertips/videos/2635…

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
OBS Studio https://obsproject.com/
Smove Mobile http://smove.com
Mastercam https://www.mastercam.com/en-us/
Stepcraft https://www.stepcraft.us/q
Microphones http://podcastbyfriday.com/mics

Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.

Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tip…

Click "View in iTunes"

Next Click on ratings and reviews in iTunes

Click the "Write a Review" button

Leave an honest rating and write a review.

Who's On This Episode

We don't know anything about the creators of this episode yet. You can add them yourself so they can be credited for this and other podcasts.
What People Are Saying
This episode hasn't been reviewed yet. You can add a review to show others what you thought.

Mentioned In These Lists

There are no lists that include "CNCRT60: CNC Router Tips Podcast On Facebook Live". You can add this episode to a new or existing list.
Rate Episode
Episode Details
Length
32m 39s

Episode Tags